ES-CS PFP Application Equipment

Our Products

Your cart is empty

ES-300 TL Fixed Ratio PFP System

  • ES-300 TL Fixed Ratio PFP System

    Cart Mounted Heated Airless Spray System Suitable for the application All Major Solvent Free Plural Component Intumescent (PFP) Fireproofing Epoxies. The ES300 TL is a compact unit built around supplying a complete proportioning system for the accurate mixing and application of PFP materials. The ES-300 TL is built on a Four Wheeled Cart designed for small application areas or repair work. It is a robust unit for use in heavy duty industries. It is easy to handle for one person.

    1 ES-300 SL PFP System complete with 300 Air Motor, Twin Post dual action ram mounted c/w follower plate assembly, air bleed valve, bucket blow off valve, pump air regulator and air shutoff valve, 15 Mtr ¾” hose assembly, PFP Spray gun and spray tip.
    1 Twin Post Ram with dual action and control switch c/w follower plate assemblies, air bleed valve, bucket blow off valve, pump air regulator and air shutoff valve.
    2 High Pressure In-Line material heaters 4KW each, (1 Base/1 Activator) thermostatically controlled, c/w high-pressure outlet thermometers.
    1 Hot Water recirculation pump with air regulator, pressure gauge air shutoff valve and water shutoff valve.
    1 Stainless Steel water recirculation/flush tank with thermostatically controlled heating, insulation, protective cover and supply water hose connection.
    1 30:1 Stainless Steel Flushing Pump c/w air regulator, pressure gauge air shutoff valve, suction hose and High-pressure outlet shutoff valve.
    1 High Pressure Outlet Manifold with base and activator feed and return valves, material isolation valves, high pressure 0-8000 P.S.I. Pressure gauges, hot water recirculation valves, and hot water/solvent flushing valve.
    1 15 Mtr Hose Bundle c/w Material Supply hoses, water heating hoses and flush supply hose fully insulated.
    1 Remote Mixer Block Assembly c/w material on/off valves, flush valves, ratio sampling valves and material check valves. 5 Mtr ½” Whip Hose paint line and ¾ “Stainless Steel mixer tube and mixer blade.
    1 High Volume Heavy Duty ES PFPG Airless spray gun c/w swivel, spray tip and holder.

    ES300 TL PFP Specification

    Mixing Ratio Pressure Ratio Pump Designation Volume per Cycle
    Delivery at 10 Cycles
    Delivery at 20 Cycles
    2.33:1 50.6:1 T232-T102 0.336 3.36 6.72
    2:1 48.7:1 T232-T116 0.348 3.48 6.96
    1:1 54.8:1 T155-T155 0.310 3.10 6.2


    Different pump configurations are available if required to give other ratios and output rates. Metering Pump Lowers are easily changed. (However this will slightly alter the delivery and pressure rates on the table above.)


    ES300 Fixed Ratio P.F.P. System Technical Information



    Category ES300 Data
    Maximum air input Pressure 9 bar (130 psi)
    Operating pressure range 0.7 – 9 bar (10 – 130psi)
    Maximum recommended speed 20 cycles per min
    Operating temperature -5 to 65°c (23 to 150°f)
    Air motor piston effective area 1452 cm2 (225in2)
    Air motor piston diameter 300 mm (11.81”)
    Stroke length 120 mm (4.75”)
    Air inlet size ¾ ” BSPP
    Weight Approx. 30kg (110lb)

    Height: 1.7 Mtrs (67”)
    Width: 0.8 Mtrs (32”)
    Length: 2 Mtrs (78.75”)
    System Weight: 600 Kgs (1325 Lbs)


    For a no obligation quotation for this product, enter the quantity your require; then press 'ADD TO CART'. Once ready, view your cart to send your quote request.


Our UK office

We supply spare parts and accessories for all major brands in the industry
Graco CoverCat Wiwa Clemco Lesoon